Programmable Muffle Furnaces
SETTING THE STANDARD IN EVERY LAB

1125°C maximum with 24-step programmability Dual temperature control for overtemperature protection
No More Ruined Samples: Restart feature allows for programming of the unit to Restart, Hold, or Shut Down after a momentary power loss.  In overtemperature conditions, the microprocessor automatically cuts power to the heating elements and alerts by flashing the appropriate code 24-Step Programmability: Allows up to 12 heating/cooling ramps or dwell periods up to 99hours 59min each to be specified in any combination.  The 24-ramp/soak profiles can be repeated continuously for an infinite number of cycles Personal Safety Features: Asbestos-free, multiplayer insulation prevents heat form reaching the unit’s surface, while the microprocessor cuts power to the heating elements whenever the door is opened  Three Chamber Capacities to Fit Any Lab: Available in 0.14 cu. ft., 0.58 cu. ft. and 1.26 cu. ft. capacities
	Warranty: All units are covered by a two-year warranty on parts, labor, and travel. Universal Applications: Ideal for performing precipitate drying, enameling, ash determinations, fusions, ignitions, tempering and more…  They even permit atmosphere other than air to be injected easily through the 9.5mm injection port

General Specifications
PROGRAMMABLE FORCED-DRAFT FURNACES
MODEL NO.	SETPOINT ACCURACY	TEMPERATURE RANGE	UNIFORMITY (at 500°C to 1125°C)	EXTERIOR DIMENSIONS, L x W x H	INTERIOR DIMENSIONS, L x W x H
FM1125-SA 120V 50/60Hz, 1700W, 14.2A	+/-5°C	Ambient to 1125°C	+/-5°C	19.37 x 14.5 x 19.5"	10 x 6 x 4"
FM1125-SB 208/240V 50/60Hz, 1700W 7.1A
FM1125-MB 208/240V 50/60Hz, 3000W, 12.5A	+/-10°C	Ambient to 1125°C	+/-8°C	23.37 x 21.5 x 21.5"	14 x 12 x 6"
FM1125-LB 208/240V 50/60Hz, 4600W, 19.2A	+/-15°C	Ambient to 1125°C	+/-10°C	23.37 x 21.5 x 28.5"	14 x 12 x 13"

So-Low Environmental Equipment Co., Inc.
10310 Spartan Drive
Cincinnati, Ohio 45215-1279 U.S.A.
513-772-9410 / Fax: 513-772-0570
e-mail address: sales@so-low.com